24V 6Ah LiFePO4 Battery Pack
This page describes a 24V pack at 6Ah, with a nominal voltage of 25.6 V and an energy figure of 153.6 Wh. The page is anchored on the 24V 6Ah specification itself. A model name shown in one third-party listing for this specification has not been verified as belonging to it, so this page does not present that name as the model designation; buyers should refer to the pack by voltage and capacity and confirm any designation in the enquiry.
Listed specification in context
The listed specification gives a compact pack: about 1.4 kg, dimensions of 152 by 65 by 97 mm, and an M6 terminal. The internal resistance is listed at no more than 35 milliohms, and self-discharge at no more than 3.5 percent per month at 25 degrees Celsius. Those figures describe this pack only. They are not a statement about other 24V packs, which have different dimensions, weights and current limits even when they share a voltage.
Cycle life is listed at 6000 cycles under a stated condition: charging and discharging at 0.2C down to 70 percent capacity. That condition matters, because a cycle figure without its condition cannot be compared with another model's figure. A buyer who compares cycle figures across models should ask for the condition behind each figure, and should not assume that a higher headline number automatically means a longer service life in their own use.
Use and limits
A battery management system watches the cells in a pack and disconnects the pack when a limit is crossed. The exact limits depend on the model, so buyers should check the protection list for the model they are considering rather than assuming every pack in a range shares the same list. In the models listed on this site, protection typically covers over-charge, over-discharge, over-current, over-temperature and short circuit, with cell balancing on some models only. Where a model page does not list balancing, it is not claimed for that model.
This is a small-capacity 24V pack. It suits a buyer who needs a compact 24V unit and who has checked that the load current, the temperature range and the physical space all match the listed specification. It is not presented as a general-purpose 24V pack for every application, and the application pages on this site do not change its listed limits. If the application needs a sustained current above the listed maximum, a larger 24V model should be considered.
Specification - as listed for this model
| Item | Listed value |
|---|---|
| Nominal voltage | 25.6 V |
| Capacity | 6Ah |
| Energy | 153.6 Wh |
| Internal resistance | At most 35 mΩ (listed) |
| Cycle life | 6000 cycles (0.2C charge/discharge to 70% capacity, listed) |
| Self-discharge | At most 3.5% per month at 25°C (listed) |
| Cell arrangement | 8S1P cylindrical cells (listed) |
| Housing | Plastic housing (listed) |
| Dimensions | 152 x 65 x 97 mm (listed) |
| Weight | About 1.4 kg (listed) |
| Terminal | M6 (listed) |
| Model designation | Confirm per model in the enquiry - see note above |
Values above are taken from the listed specification for this model only. They are not a range-wide promise. Items not listed here are confirmed per model in the enquiry.
Enquiry checklist
Before sending an enquiry, note the voltage, capacity, quantity, application and any required certification document. State whether the pack will be used indoors or outdoors, and whether a display or a particular terminal type is needed. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: +86-755-29040095, +86-18576759460 | Email: michael_he@yabopower.com
Frequently asked questions
How do I get a quotation?
Send an enquiry with the voltage, capacity and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
ISO 9001 is stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.