48V LiFePO4 Battery Pack
The 48V category on this site covers listed packs at 50Ah and 100Ah, plus the home battery packs that share the 51.2 V system voltage. The 48V pages are written so that a general 48V pack and a home battery pack are not confused: the pack pages describe a pack, while the home pages describe a wall-mounted home unit with its own stored-energy figure.
What the 48V range contains
The 50Ah pack is listed at 51.2 V with a 2560 Wh energy figure, a 58.4 V charge voltage and an IP55 housing. Its cell arrangement is listed as a 16-series, 1-parallel arrangement. The 100Ah pack is listed at the same system voltage with a 5120 Wh energy figure, the same charge voltage and a display on the unit. The two packs share a voltage and a housing size in their listed specifications, but they are different models with different weights and current limits, so their pages are kept separate and their figures are not merged.
The home battery packs in this category are described on their own pages, where the stored energy is the headline figure: 5kWh, 8.7kWh and 12kWh. A buyer comparing a 48V pack with a home pack should compare the system the unit will serve, not only the energy figure. A home unit is presented for home storage use, while a pack is presented for a wider set of 48V uses. The application pages describe those uses in general terms without turning an application into a product specification.
Choosing a 48V unit
Nominal voltage is the working voltage used to describe a pack, while charge voltage and cut-off voltage are separate limits. A 12.8 V pack, a 25.6 V pack and a 51.2 V pack belong to different systems and are not interchangeable, even when their capacities look similar. Buyers should confirm the system voltage, the charge voltage and the cut-off voltage for the exact model, and should check that the existing charger or inverter settings match those limits before ordering.
If an existing system already runs at 48V, the first check is the charge voltage and the cut-off voltage, because those limits decide whether the existing equipment can work with the new pack. The second check is the sustained discharge current, which is listed per model. The third check is physical: dimensions, weight and terminal layout. Energy alone does not answer any of those three checks, which is why each product page keeps its specification table separate.
Models on this page
48V 50Ah LiFePO4 Battery Pack
51.2 V, 50Ah, 2560 Wh, charge voltage 58.4 V, IP55.
48V LiFePO4 Battery Pack (100Ah Model)
51.2 V, 100Ah, 5120 Wh, charge voltage 58.4 V, with display, IP55.
Powerwall LiFePO4 Battery - 5kWh Home Pack
48V, 100Ah, listed at 5kWh.
Powerwall LiFePO4 Battery - 8.7kWh Home Pack
48V, 170Ah, listed at 8.7kWh.
Powerwall LiFePO4 Battery - 12kWh Home Pack
48V, 230Ah, listed at 12kWh.
Enquiry checklist
Before sending an enquiry, note the voltage, capacity, quantity, application and any required certification document. State whether the pack will be used indoors or outdoors, and whether a display or a particular terminal type is needed. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: +86-755-29040095, +86-18576759460 | Email: michael_he@yabopower.com
Frequently asked questions
How do I get a quotation?
Send an enquiry with the voltage, capacity and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
ISO 9001 is stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.