Small LiFePO4 Battery
The small pack category gathers the smallest listed packs on this site: a 12V pack at 6Ah, a 12V pack at 12Ah and a 24V pack at 6Ah. Small here means small capacity and compact dimensions in the listed specification, not a separate product line with its own specification.
What counts as small on this site
The 12V 6Ah pack is the lightest listed pack on this site, at about 0.73 kg in its listed specification, with dimensions that fit a tight space. The 12V 12Ah pack is about 1.4 kg, and the 24V 6Ah pack is also about 1.4 kg. Those weights and dimensions are listed per model and should be checked against the space available, because a small pack is often chosen for a space constraint rather than for capacity alone. A buyer who needs a small pack should also check the discharge current, because a small pack can have a low sustained current limit even when its voltage matches the system.
Small packs are sometimes used for portable units, small backup units and low-current applications. The application pages describe those uses in general terms. An application description does not make a small pack suitable for a high-current use, and it does not change the listed current limit for the model. If the load needs a sustained current above the listed maximum, a larger pack should be considered, even if the small pack's capacity looks sufficient on paper.
Choosing a small pack
For a business enquiry, the most useful details are the system voltage, the capacity, the expected discharge current, the operating temperature range and the physical space available. A pack that fits on paper can still fail in use if the discharge current, the temperature range or the terminal layout does not match the application. That is why this site asks buyers to confirm specifications per model, rather than selecting from a generic table.
Depth of discharge describes how much of a pack's capacity is used before it is recharged. Using a smaller depth of discharge generally leaves more cycles available, while deep discharges use more capacity per cycle. Cycle-life figures therefore only make sense with the test condition attached, such as the discharge rate and the capacity remaining at the end of the test. This site reports cycle life per model with its stated condition, and does not convert one model's figure into a range-wide claim.
Models on this page
12V 6Ah LiFePO4 Battery Pack
12.8 V, 6Ah, about 0.73 kg as listed.
12V 12Ah LiFePO4 Battery Pack
12.8 V, 12Ah, about 1.4 kg as listed.
24V 6Ah LiFePO4 Battery Pack
25.6 V, 6Ah, about 1.4 kg as listed.
Enquiry checklist
Before sending an enquiry, note the voltage, capacity, quantity, application and any required certification document. State whether the pack will be used indoors or outdoors, and whether a display or a particular terminal type is needed. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: +86-755-29040095, +86-18576759460 | Email: michael_he@yabopower.com
Frequently asked questions
How do I get a quotation?
Send an enquiry with the voltage, capacity and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
ISO 9001 is stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.