24V LiFePO4 Battery Pack
The 24V category on this site covers three listed packs: a 6Ah pack, a 60Ah pack and a 150Ah pack, all at a 25.6 V nominal voltage. These are the 24V models with a listed specification. Other 24V capacities that appear only as general titles are not given product pages here.
What the 24V range contains
The 6Ah pack is the smallest listed 24V model, with a 153.6 Wh energy figure and a compact housing. Its product page is anchored on the 24V 6Ah specification itself, because the model name shown in one third-party listing has not been verified as belonging to this specification. Buyers should therefore refer to this model by its voltage and capacity, and confirm the model designation in the enquiry if a designation is needed for an order.
The 60Ah pack is a mid-range 24V model with a 1536 Wh energy figure, a 33140-format cell arrangement and an IP65 housing in its listed specification. The 150Ah pack is the largest listed 24V model, with a 3840 Wh energy figure and an IP55 housing. The jump from 6Ah to 60Ah to 150Ah is large, so the three pages are not a smooth ladder of small steps. A buyer should treat each page as a separate model with its own dimensions, weight and current limits, and should not interpolate a capacity between them.
Choosing a 24V pack
Nominal voltage is the working voltage used to describe a pack, while charge voltage and cut-off voltage are separate limits. A 12.8 V pack, a 25.6 V pack and a 51.2 V pack belong to different systems and are not interchangeable, even when their capacities look similar. Buyers should confirm the system voltage, the charge voltage and the cut-off voltage for the exact model, and should check that the existing charger or inverter settings match those limits before ordering.
Depth of discharge describes how much of a pack's capacity is used before it is recharged. Using a smaller depth of discharge generally leaves more cycles available, while deep discharges use more capacity per cycle. Cycle-life figures therefore only make sense with the test condition attached, such as the discharge rate and the capacity remaining at the end of the test. This site reports cycle life per model with its stated condition, and does not convert one model's figure into a range-wide claim.
Models on this page
24V 6Ah LiFePO4 Battery Pack
25.6 V, 6Ah, 153.6 Wh. Page anchored on the specification itself.
24V 60Ah LiFePO4 Battery Pack
25.6 V, 60Ah, 1536 Wh, 33140 cells in 8S4P, IP65.
24V 150Ah LiFePO4 Battery Pack
25.6 V, 150Ah, 3840 Wh, IP55.
Enquiry checklist
Before sending an enquiry, note the voltage, capacity, quantity, application and any required certification document. State whether the pack will be used indoors or outdoors, and whether a display or a particular terminal type is needed. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: +86-755-29040095, +86-18576759460 | Email: michael_he@yabopower.com
Frequently asked questions
How do I get a quotation?
Send an enquiry with the voltage, capacity and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
ISO 9001 is stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.