Solar LiFePO4 Battery
This is an application page, not a product page. It describes how LiFePO4 packs are used for solar storage in general terms, using the company's general application titles as its boundary. It does not present a solar-specific model, because no such model is listed with a dedicated specification on this site.
How a pack is used with solar
With solar, a battery pack stores energy generated during the day for use at night or during cloudy periods. The pack's voltage must match the solar system, and its capacity must be considered alongside the solar array size and the daily energy use. A pack that is too small for the daily load will cycle deeply every day, while a pack that is far larger than the load will rarely be used fully. Both cases affect how the pack should be sized, which is why the sizing guide on this site asks about load and solar input together, rather than recommending a capacity from a single figure.
The company's general titles mention solar storage, solar management and home solar use in several places. Those titles describe application areas, not models. A buyer who needs a pack for solar storage should therefore start from a listed pack page - for example a 48V pack or a home battery pack - and check its voltage, capacity, charge voltage and dimensions against the solar system, rather than ordering from an application description alone.
What to check before enquiring
For a business enquiry, the most useful details are the system voltage, the capacity, the expected discharge current, the operating temperature range and the physical space available. A pack that fits on paper can still fail in use if the discharge current, the temperature range or the terminal layout does not match the application. That is why this site asks buyers to confirm specifications per model, rather than selecting from a generic table.
Depth of discharge describes how much of a pack's capacity is used before it is recharged. Using a smaller depth of discharge generally leaves more cycles available, while deep discharges use more capacity per cycle. Cycle-life figures therefore only make sense with the test condition attached, such as the discharge rate and the capacity remaining at the end of the test. This site reports cycle life per model with its stated condition, and does not convert one model's figure into a range-wide claim.
Temperature is a check that is often overlooked when a pack is chosen by capacity alone. The listed temperature ranges on each product page state the charging, discharging and storage ranges for that model, and those ranges should be checked against the installation location and the climate. Charging below the listed charging range should not be attempted without a specific confirmation for the model, because charging in cold conditions can damage the cells. If charging in cold conditions is a regular requirement, the enquiry should state the lowest charging temperature.
Enquiry checklist
Before sending an enquiry, note the voltage, capacity, quantity, application and any required certification document. State whether the pack will be used indoors or outdoors, and whether a display or a particular terminal type is needed. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: +86-755-29040095, +86-18576759460 | Email: michael_he@yabopower.com
Frequently asked questions
How do I get a quotation?
Send an enquiry with the voltage, capacity and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
ISO 9001 is stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.